Our Process

-Clean and degrease headlights 

-Wet-sand starting at 400 grit and working up to 3000 grit 

-Hand dry with a microfiber towel

-Wipe down with alcohol 

-Buff out the sanding marks with a dual action buffer

-Hand apply ceramic coating to protect against future yellowing

DISCLAIMER: While this process will make your headlights look brand new, this will only be for a short amount of time. Roughly 1 year to 2 years before you may begin to see yellowing again even with regular layers of wax applied. 

Your best option is to either buy new headlights, or repeat this same process above, but instead of buffing and applying a coating. Spray 2K clearcoat on instead and avoid driving the vehicle for a day or two. 

However, I understand those options are much more expensive and time-consuming, which is why I offer the above service.